696 Series
Specifications

PART 1 - GENERAL

1.01 Work Included

The manually operated fabric coiling doors shall be Series 696 as manufactured by Overhead Door Corporation.

1.02 Related Work

Opening preparation, miscellaneous or structural metal work, access panels, field painting, field electrical wiring, wire, conduit, fuses, and disconnect switches are in the Scope of Work of other divisions or trades.

PART 2 - PRODUCT

2.01 Curtain

Curtain shall be 2mm thickness (Optional curtain, 1mm reinforced vinyl) multi-layer PVC impregnated fabric with field-replaceable, full-width vision panel by 28" (711mm) high. (Optional 42" (1067mm) high vision panel.) (Optional cut in vision lites 18" (457mm) or 36" (914mm) high replaceable vision lites.) (Optional curtain of black vinyl-coated polyester screen with 25% openness, 75% UV blockage and 13.5oz./sq. yd. weight.) Curtains shall be equipped with flexible glass reinforced polymer air pressure struts (number of which is dependent on door height) attached to both sides. Curtains available in red, blue and orange.

2.02 Bottom Bar

The door shall be an extruded aluminum member to reinforce the curtain. The bottom bar shall incorporate a system to release the curtain from the guides upon impact and have floor-level reset capability.

2.03 Guides

Guides shall be an architectural aluminum channel with two ultra-high molecular weight (UHMW) polyethylene retainer strips attached to a continuous structural steel wall angle.

2.04 Operation

Manual hand chain hoist operation.

2.05 Door Roll

Curtain and bottom bar shall be factory wrapped onto steel tube barrel.

2.06 Counterbalance

The torsion spring counterbalance shall be adjustable for proper balance and be enclosed in the steel barrel.

2.07 Hood

(Optional hood shall be minimum 24-gauge galvanized steel, mounted to bracket tabs.) (Optional sloped hood available.)

2.08 Finish

Curtain color as specified in 2.01. Wall angle brackets shall be painted black. Bottom bar shall be anodized black. Guide channel shall be clear anodized.

PART 3 - EXECUTION

3.01 Execution

The Series 696 high-speed doors shall be installed in accordance with Overhead Door Corporation instructions and standards. Installation shall be by authorized Overhead Door Corporation representatives.