665 Series
Specifications

SECTION 08334
ROLLING COUNTER DOORS
665 Series Rolling Wood Counter Doors

PART 1 - GENERAL

1.01 RELATED DOCUMENTS

A. All of the Contract Documents, including General and Supplementary Conditions, and Division 1 General Requirements, apply to the work of this Section

1.02 SUMMARY

A. The work of this Section includes rolling wood counter doors.

B. Related Sections: Other specification sections which directly relate to the work of this Section include, but are not limited to, the following:

1. Section 08710 - Finish Hardware; key cylinders for locks.

1.03 SUBMITTALS

A. Product Data: Submit manufacturers product data and installation instructions for each type of rolling counter door. Include both published data and any specific data prepared for this project.

B. Shop Drawings: Submit shop drawing for approval prior to fabrication. Include detailed plans, elevations, details of framing members, required clearances, anchors, and accessories. Include relationship with adjacent materials.

1.04. QUALITY ASSURANCE

A. Manufacturer: Rolling counter doors shall be manufactured by a firm with a minimum of five years experience in the fabrication and installation of rolling counter doors. Manufacturers proposed for use, which are not named in these specifications, shall submit evidence of ability to meet performance and fabrication requirements specified, and include a list of five projects of similar design and complexity completed within the past five years.

B. Installer: Installation of rolling counter doors shall be performed by the authorized representative of the manufacturer.

C. Single-Source Responsibility: Provide doors, guides, motors, and related primary components from one manufacturer for each type of door.  Provide secondary components from source acceptable to manufacturer of primary components.

D. Pre-Installation Conference: Schedule and convene a pre-installation conference just prior to commencement of field operations, to establish procedures to maintain optimum working conditions and to coordinate this work with related and adjacent work.

1.05 DELIVERY, STORAGE, AND HANDLING

A. Deliver materials and products in labeled protective packages. Store and handle in strict compliance with manufacturers instructions and recommendations. Protect from damage from weather, excessive temperatures and construction operations.

PART 2 - PRODUCTS

2.01 ACCEPTABLE MANUFACTURER

A. Provide wood counter doors by Overhead Door Corporation, Pennsylvania Division; Telephone 800-929-2553 or 717-248-0131; Fax 800-929-1274.

2.02 WOOD COUNTER DOORS

A. Trade Reference: 665 Series Wood Counter Doors by Overhead Door Corporation.

B. Curtain: Interlocking wood slats, 1-5/8 high by 1/2 thick. Bottom bar shall have flush lift handles.  Slat Material and Finish: (Pine) (Red oak) (Birch)  (White oak) (Custom) wood with natural finish.

D. Guides: Wood matching slat material.

E. Brackets: Galvanized steel to support counterbalance, curtain and hood.

F. Counterbalance: Helical torsion spring type housed in a steel tube or pipe barrel, supporting the curtain with deflection limited to 0.03 per foot of span.  Counterbalance shall be adjustable by means of an adjusting tension wheel.

G. Hood: (Not required.) (Wood matching slats.  Provide intermediate support brackets as required.)

H. Operation: Manual push up. (Crank operation.)

I. Locking: Slide bolt locks suitable for use with padlock (and provide cylinder locks.)

J. Wall Mounting Condition: (Face-of-wall mounting.)  (Between jambs mounting.)

PART 3 - EXECUTION

3.01 PREPARATION

A. Take field dimension and examine conditions of substrates, supports, and other conditions under which this work is to be performed. Do not proceed with work until unsatisfactory conditions are corrected.

3.02 INSTALLATION

A. Strictly comply with manufacturers installation instructions and recommendations. Coordinate installation with adjacent work to ensure proper clearances and allow for maintenance.

B. Instruct Owners personnel in proper operating procedures and maintenance schedule.

3.03 ADJUSTING AND CLEANING

Test rolling counter doors for proper operation and adjust as necessary to provide proper operation without binding or distortion.

B. Touch-up damaged coatings and finishes and repair minor damage. Clean exposed surfaces using non-abrasive materials and methods recommended by manufacturer of material or product being cleaned.