390 Series "Preferred Insulated" SPECIFICATIONS: 391 and 399 Series Sections: The four or five
sections in a door each measure 2" thick and are embossed from roll-formed galvanized steel and are insulated with 1-15/16" expanded polystyrene with a steel backcover. Section heights are 16-3/4", 19"
and 20-13/16" as required for various door heights. Available only in the widths and heights shown on the price grid. Sections are finished with a baked-on primer and white, brown or almond polyester top
coat. Bottom section includes a full length pliable bulb-type gray PVC rubber weatherseal with a retainer bar. All sections are solid. Hardware and Track: Vertical and horizontal tracks are
2" hot-dipped galvanized steel with bolt-on headplates. The horizontals include a 12" standard radius. Standard hardware is hot-dipped galvanized steel with self-lubricating urethane rollers. Springs: Torsion springs available on all widths. Contact your local distributor for
details. Struts: One (1) 2-1/4" reinforcing steel strut is provided on doors 14 foot wide and
over. Three (3) 2-1/4" struts are provided on 17' wide doors. Headroom: A minimum of 12" headroom is required with the 12" radius track. Allow an extra 3" if a door
operator will be used. 399 Series(ONLY) Sections: Sections are finished with a baked-on primer and white or almond polyester top coat only. SELLING FEATURES:
391, 394 and 399 Series
- Solid steel sandwich construction consists of 2" thick polystyrene insulation that is bonded to both interior and exterior galvanized steel skins through a special, hot melt, urethane laminating agent.
- Section construction forms an extremely rigid section that provides exceptional insulation and air infiltration qualities.
- R-Value of 9.83.
- Exterior Steel is 25 gauge skin.
- UL Classified in regard to flammability and smoke characteristics.
- High Definition "Classic" Raised-Panel Embossment (391 Series).
- High Definition Long "Ranch" Raised-Panel Embossment (399 Series)
- Limited Lifetime Warranty
- Hot-dipped Galvanized Steel provides Rust Protection
- Epoxy primer and 2-coat Baked-on Polyester paint.
- PVC premium bulb-type, bottom weatherseal protects against wind and rain infiltration.
- Molded, self-lubricating urethane rollers are quieter and longer-lasting than steel rollers (continuous usage test indicate urethane roller lifecycle surpasses steel roller over 4 to 1).
- An embossed woodgrain texture accentuates the curb-appeal of the embossments or flush surface.
- Full length, closed tube galvanized hinges increases the load bearing surface--ensuring smoother operation and long-term reliability.
|
