201 Series "Promark" Standard Wood Panel

SPECIFICATIONS:

Sections:

The four or five sections in a door each measure a nominal 1-3/8" thick and are constructed of West Coast kiln dried lumber.  All joints are glued and steel pinned for strength.  Panels are 1/4" exterior grade hardboard.  Available only in widths and heights shown on price grid.  Sections are sanded and ready for finish.  One section is open for glass.

Hardware and Track:

Vertical and horizontal tracks are 2" hot-dipped galvanized steel with bolt-on headplates.  The horizontals include a 12" standard radius.  Standard hardware is hot-dipped galvanized steel with self-lubricating urethane rollers.

Springs:

Torsion springs available on all widths. Contact your local distributor for details.

Struts:

Three (3) 2-1/4" reinforcing steel struts and truss straps are provided on double-wide doors.

Headroom:

A minimum of 12" headroom is required with the 12" radius track.  Allow an extra 3" if a door operator will be used.

Please refer to the Options List for other requirements.

Wood Dimensions:

(excluding molding) SINGLE-CAR                          DOUBLE-CAR

Top Rail                         3-1/8"                                         3-1/8"
Bottom Rail                    3-1/8"                                         4-7/8"
End Stiles                       3-1/8"                                         4-7/8"
Center Stiles                   2-3/4"                                         2-3/4"
Intermediate Rails (pair)  2-1/4"                                         2-1/4"