Commercial Operator model RMX

RMX®

The UL 325 2010 certified RMX^® medium-duty commercial operator is designed for quicker installation and hassle-free operation. The RMX^® offers convenient features and technical innovations found nowhere else in a medium-duty operator.

Motor

Single-phase voltages of 115 Volts AC and 230 Volts AC ½ horsepower

Direct Coupling

Provides fast, easy installation with fewer parts and better structural support

Display

16-character LCD display provides easy-to-read set-up and diagnostics with backlight for low-light conditions

Cycle Counter

Displays the total cycles logged over the operator’s lifetime, to support warranty and service functions

Adjustable Shaft

Output shaft can be moved from one side to the other providing flexible installation options

Independent Timers

Automatic maximum run timer stops the close function if preset run time is exceeded, allowing for inspection

Control system

On-board Open, Close and Stop buttons make set up and testing simple, saving time during installation

Control buttons

Call Mode/Run Mode
Backlight
Scroll Up/Down
Set/Clear

Automatic tensioning belt

No adjustment is needed, belt automatically adjusts itself to the correct tension

Exterior radio hookups

For fast, simple RF connectivity to enable remote door operation

Automatic set-up boards with socket lock protection

Prevents accidental wiring errors through “plug and play” technology

RMX^® Trolley

For use on standard lift doors up to 14 feet high and 620 lbs

RMX^® Jackshaft with and without Hoist – Sectional Door

For use on vertical lift, lift clearance sectional door up to 16 feet high and 620 lbs

RMX^® Jackshaft with and without Hoist – Rolling Service Doors and Grilles

For use with rolling steel doors or grilles up to 16 feet high and 580 lbs in weight

Accessories for RMX^®

Modules
	Auxiliary Output Module - this plug-in module will provide several auxiliary sets of dry contacts that are microprocessor controlled. Outputs can be configured using the on-board keypad. To maintain compliance when using a sensing edge as a primary safety device with our X-Series commercial operators labeled UL 325 2010, you must use one of the following modules:
	Timer to Close Module - provides auxiliary control inputs, auxiliary safety inputs, auxiliary timer hold input, and an automatic door closing feature with a user-selectable time-delay. Safety inputs can be enabled or disabled using the on-board keypad. A sensing device must be used with this module.
	Monitored Edge Interface Module – provides an interface between two-wire monitored sensing edges and our X-Series operators. This module allows for the connection of a two-wire monitored sensing edge to be connected to the ODC STB terminals. Compatible for use on Miller Edge electronic two-wire monitored edge models ME, MT and MU.
Transmitters
	The RMX^® operator features an external 3-wire radio hookup for fast and simple RF connectivity. Radio transmitters may be single-button, two-button, three-button, four-button, or Open/Close/Stop.
Motors
	The following motors are available when specified: Totally Enclosed Non Ventilated (TENV) Totally Enclosed Fan Cooled (TEFC)
Sensing Devices
	Bottom Sensing Edge - stop and reverses the door upon contact with an obstruction.
	Safe-T-Beam^® - senses an obstruction and signals the operator to stop or reverse the door. Commercial Photo Eye Kit^® - metal enclosure further protects Safe-T-Beam^® photo eyes from damage.
	New! VITECTOR^® NEMA 4/4X OPTOEYE is a set of infrared transmitter and receiver safety sensors constructed of durable materials to withstand the toughest environments including commercial and industrial applications.