Aluminum Glass Doors 511 Series

Model 511

The Model 511 door is designed in sizes up to 20'2" (6147 mm) wide and 16'1" high (4902 mm). Featuring a narrow center stile width of 5/8" (16mm), these doors are sleek, attractive and permit maximum visibility. An array of glazing choices, top and bottom rail widths, finishes and special options customizes the 511 to satisfy nearly any project requirement.

Panel thickness

1 3/4" (45 mm)

Maximum standard width

16'2" (6147 mm)

Maximum standard height

16'1" (4902 mm)

Material

6063-T6 aluminum

Standard finish

204R-1 clear anodized

Center stile width

21/32" (17 mm)

End stile width

2 3/4" (70 mm)

Top rail width

2 3/8" (60 mm)or 3 3/4" (95 mm)

Lock

Galvanized, interior-mounted single unit

Top intermediate rail width

3/4" (19 mm)

Bottom intermediate rail width

5/8" (16 mm)

Bottom rail width

2 3/4" (70 mm) or 3 3/4" (95 mm) or 4 1/2" (114 mm)

Weatherseals

Bottom, flexible PVC

Standard springs

10,000 cycle

Track

2" (51 mm)

Mounting

Angle

Operation

Manual pull rope

Hinges and fixtures

Galvanized steel

Glazing options:

  - 1⁄8" (3 mm) DSB
  - 1⁄8" (3 mm)or 1⁄4" (6 mm) plexiglass
  - 1⁄8" (3 mm) or 1⁄4" (6 mm) tempered
  - 1⁄8" (3 mm) or 1⁄4" (6 mm) clear lexan
  - 1⁄8" (3 mm) or 1⁄4" (6 mm) Low-E
- 1/8" (3 mm)or 1/4" (6 mm) solar bronze
  - 1⁄4" (6 mm) wire glass
  - 1/8" (3 mm) or 1/4" (6 mm) obscure
- 1⁄2" (12 mm) insulated glass: DSB, tempered, clear lexan, Low-E, solar bronze, or obscure
- 1/4” (3 mm) twin-wall, 3/8” (9 mm) twin-wall, or 5/8” (15 mm) triple-wall polycarbonate

Electric operator or chain hoist
Bottom sensing edge

3" track
Bracket mounting (not available on full vertical door tracks)
Higher-cycle springs in 25k, 50k, 75k, 100k cycles
Finish options:
- Bronze anodized
- Select from 197 standard powder coat colors or colored to match specification