FireKing® Commercial Door Operator Heavy Duty

FireKing® Commercial Door Operator Heavy Duty

The FireKing® operator is designed for FireKing® rolling fire doors that have up to a 60-cycle/hour and greater than a 100-cycle/day requirement.
Features 
MotorContinuous-duty AC motor with overload protection
Drive Heavy-duty worm gear running in oil bath.​​​​
Brake 24 VDC disc brake standard.
Emergency DisconnectEmergency hoist for manual operation.
Warranty2-year/20,000-cycle limited warranty.
Includes 9-tooth sprocket to attach limit chain to door.
Continuous-duty AC motor with overload protection.
LimitLock® electro-mechanical limits.
Voltamatic® voltage simplification.
Maximum run timer automatically adjusts to up and down run time
Heavy-duty worm gear running in oil bath.
Delay on reverse.
16-character LCD display.
UL 325 Listed.
Advanced radio receiver displays and stores activation by transmitter ID number on the LCD screen.
3-button control station.
Programmable mid-stop.
Emergency hoist for manual operation. Ships right hand from factory and is easily changed in the field.
24 VDC disc brake with progressive braking.
Cycle count available via LCD screen.

 

 

Accessories & Options 
Timer Close Module

Timed close set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input.

Auxiliary Output Module

Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both.

UL325 Listed Reversing Devices

The installation of a monitored external entrapment device is required for momentary contact close operation on all commercial door operators. The following devices, when purchased through Overhead Door, are UL Approved for use to meet this requirement:
  • MillerEdge ME/MT/CPT (DC or T3) 2-wire edge sensor. Must be used with TCM (OPABTCGX.S) or Interface Module (OPAKMEIGX.S).