Sign In

Rolling Steel Service Doors 610

rolling service door on building
​​​​

​​​​​​​​​​​​​​​​​​​​Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. ​ A host of other options — including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages — allow the 610 to be adapted to any environment.

Security and Storm Shelter Model 610F is a specialized option designed for storm shelters, schools and emergency operations centers. Model 610F provides tornado resistance while meeting the high wind load and impact requirements for FEMA 361.

Features
​​Features

Standard max width
30'4" (9246 mm)

Standard max height
28'4" (8636 mm)

Curtain
16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
  * not all slat profiles

Finish
Gray, tan, white or brown

Hood
24 ga. galvanized steel ​

Wind load
20 psf

Standard mounting
Face of wall ​

Operation
Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)

Standard springs
20,000 cycle ​

Weatherseals
Bottom bar astragal

Guides
Three structural steel angles PowderGuard® weathered finish with black powder coat ​

Bottom bar
Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

Lock
Interior slide bolt on push-up
Padlockable chain keeper on chain hoist ​

Warranty
24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together) ​

Fenestration

fenestration on slats
Curved slat with 3" x 5/8" fenestration
fenestration on slats
F265 slat with 10" x 1" fenestration
 

Slat profile
STANDARD - CURVED 

C-187 is standard up to 15'4" (4877 mm) wide in 22 Gauge. Other gauge options available.
c-187 slat

C-275 is option up to 15'4" and standard for doors over 15'4" wide (4877 mm). Gauge dependent on opening width. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm).
Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.
c-187 slat

OPTION – FLAT

F-265 available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available.  Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (mm x mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

F-265E – 14 gauge extruded aluminum solid slat available up to 20’4” (6198 mm) width.
Perforation or fenestration not available on model 610 on F265E.
F265 slat

C-600 - For special applications requiring herculean size and strength, consider the 610 Series door with C-600 slats. This non-insulated, oversized door fits openings up to a maximum 1500 square feet (139.4 m2.), in widths up to 70' (21,336 mm) and heights up to 30'4" (9246 mm). The curtain is crafted with 6" x 1 3/8" (152 mm x 35 mm) curved, 18, 16 or 14-gauge steel slats for unparalleled strength and durability. No perforation or fenestration on model 610 on C-600.
C600 slat ​​​​​​​​​

Door Options
​​Door Options
  • Electric operator (RHX®, RSX®, RMX®) or crank operation
  • Bottom sensing edge
  • Sloping bottom bar
  • Between-jambs mounting
  • Stainless steel or aluminum slats
  • High-usage package
  • High-wind load (FBC, TDI, DADE)
  • Cylinder lock
  • Exhaust ports
  • Flat slat profile (F-265)
  • C-600 heavy duty 6" curved slat profile
  • Perforated 18 ga. steel slats with 1/16" (2 mm) diameter holes on 1/16" (2 mm) centers
  • Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) on C-275 or F265 slat profiles
  • Fenestrated 18 ga. steel slats with uniformly spaced openings of 1" x 10" (25.4 mm x 254 mm) on F265 slat profile
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes
  • Special application doors:
    - Oversized doors to 1500 sq. ft. (139.4 sq. m)
    - Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
    - Spark-resistant doors, craneway doors, pass doors ​​
  • Security, Tornado and Storm Shelter Door - 610F
  • - FEMA 361
    - Structural Wind Load ASTM with design pressure of +/- 300 psf
    - Impact testing ASTM E1886; Impact rated at 100 mph
    - 12 gauge galvanized steel
    - Available in door sizes 4’ x 4’ through 12’ x 12’ ​​



Colors
​​Colors

Standard Exterior Color

  • white color swatch White
  • gray color swatch Gray
  • tan color swatch Tan
  • brown color swatch Brown​​​
  • Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.


Powder Coat Color Options

​PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.​​

Powder Guard color options​​​​​​​​​​

x
This website uses cookies to ensure you get the best experience on our website. More info. Accept