Sign In

Rolling Steel Service Doors 625

rolling steel door on building

​​​​​​​​​​​​​​Stormtite™ Insulated Heavy-Duty Rolling Doors

The Model 625 rolling steel doors are an insulated, heavy-duty rolling service door that is an ideal choice for applications requiring a moderate level of thermal protection. Designed in sizes up to 30'4" wide and 28'4" high (9246 mm and 8636 mm), these doors are constructed with a CFC-free, foamed-in-place polyurethane insulation. Vinyl weatherstripping on the bottom bar, exterior curtain-side guide and hood baffle provides additional protection against air infiltration.


Standard max width
30'4" (9246 mm)

Standard max height
28'4" (8636 mm)

24 ga. galvanized steel front
24 ga. galvanized steel back

Foamed-in-place, CFC-free polyurethane
R-value 7.7 (1.35 W/m2)

Gray, tan, white or brown ​

24 ga. galvanized steel ​

Sound Transmission Class rating

Wind load
20 psf ​

Standard mounting
Face of wall

Chain hoist ​

24-month limited on door
3 year/20,000 cycles limited on door & operator system (when purchased together) ​​​

Slat profile
Flat, insulated, type F-265 ​

F-265i – available up to 30’4” (9246 mm) wide in 24 gauge. Other gauges available. Insulated slat curtain provides R-value of 7.7; U-value of 0.13, STC of 21. No perforation or fenestration available on F26i5. Vision lites available in 5/8" x 3" (16 mm x 76 mm) or 1”x10” (25.4 mm x 254 mm).

f-265i slat​​

Standard springs
20,000 cycle

Bottom, exterior curtain-side guide, interior hood baffle ​

Three structural steel angles PowderGuard® Weathered finish with black powder coat

Bottom bar
Primed steel with vinyl weatherseal ​

Padlockable chain keeper ​​​

Door Options

Door Options

  • Electric operator (RHX®, RSX®, RMZ®) or crank operation
  • Bottom sensing edge
  • Galvanized steel bottom bar angles and guides
  • Insulated guides
  • Sloping bottom bar
  • Between-jambs mounting
  • Stainless steel or aluminum slats
  • High-usage package
  • High-wind load (FBC, TDI, DADE)
  • Weatherseal for interior side guide
  • Lintel seal
  • Cylinder lock
  • Slide bolts
  • Exhaust ports
  • Vision lites uniformly spaced 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (25.4 mm x 254 mm)
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes
  • Special application doors:
    - Oversized doors to 1500 sq. ft. (139.4 sq. m)
    - Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
    - Spark-resistant doors, craneway doors, pass doors
  • Air infiltration package (meets IECC code requirements 2012 C402.4.3/2015 C402.5.2); includes guide cover and cap;dual brush guide seal; lintel seal; bottom astragal ​​


Standard Exterior Color

  • white color swatch White
  • gray color swatch Gray
  • tan color swatch Tan
  • brown color swatch Brown​​​

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.

Powder Coat Color Options

​PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.​

Powder Guard color options​​​​​​

This website uses cookies to ensure you get the best experience on our website. More info. Accept