Sign In

​​​​​Advanced Rolling Steel Service Doors 626​

rolling steel door on building
​​​ ​​

​​​​​​​​​​​​​​​​RapidSlat® Model 626 

This insulated advanced service door is perfect for climate controlled situations and applications with weather extremes such as external doors on a food manufacturing facility.​

Features
​​​​​​Features

Standard max width
up to 20' (6096 mm) depending on gauge and slat type

Standard max height
up to 20' (6096 mm) depending on gauge and slat type

Insulation
R-value of 7.71 (1.35 W/m2) for energy-efficiency.
U-value of .13 and sound transmision rating of 21.

Mounting
Interior or exterior face of wall

Control panel
Variable frequency drive controller with self-diagnostics (time delay self-close timer and non-resettable cycle counter included); LCD readout, enclosure NEMA 4X rated

Curtain
Interlocking roll-formed slats, end locks attached to prevent lateral movement.

Flat profile (F-265i) for doors up to 20' wide 24 gauge galvanized steel front and back slats for doors up to 20' wide. 

Slat cavity shall be filled with CFC-free, foamed in-place, polyurethane insulation

Curtain finish
Gray, tan or white PowderGuard® Max powder coat with hardening additive

Bottom bar
Two PowderGuard® Premium powder coated black angles (min. thickness 3/16”) with 2-wire, self-monitoring, fail safe, electric sensing edge

Hood
24 gauge galvanized steel primed, black painted; interior hood baffle included

Brackets
Min. ¼” hot rolled primed, PowderGuard® Premium powder coated black steel

Guides
Three structural steel angles PowderGuard® Premium powder coated black

Door roll
Direct driven, springless roll with integrated shafts; self-aligning grease-able sealed bearings; door does not require counterbalance device

Safety devices
Built-in brake mechanism provides additional peace-of-mind against uncontrolled curtain travel

Wireless monitored safety edge - all doors are equipped with a mandatory reversing or sensing edge to prevent entrapment.

Photoelectric safety sensors with guards - provide additional safety during door operation to help prevent injury and damage

Operation
Direct drive, integrated gear motor/brake assembly (up to 24” per sec up speed / 12” per sec down speed); drive assembly and limit sensors are factory pre-assembled; manual hand chain for power outage

Actuator
Single open/close/stop push button station incorporated into control panel

Wind load
20 psf when optional wear strips are not specified

Warranty
5 year limited warranty coverage on all mechanical door system components and control panel hardware. ​​

Door Options

Door Options

​​
  • Flat profile type F-265i for doors up to 20' wide also available in: [Front Slat] 22, 20, 18 gauge galvanized steel; 22, 20 gauge stainless steel; 18 gauge (.040") aluminum [Back Slat] 22 gauge steel; 24 gauge stainless steel; 22 gauge (.024") aluminum
  • Bottom Bar also available in: galvanized steel, stainless steel, aluminum
  • Guide options include galvanized steel and powdercoated steel
  • Hood also available in: powdercoat, stainless steel and aluminum 
  • Brackets also available in: powdercoat, and galvanized steel
  • Direct drive motors available in 1 HP, 2 HP, 3 HP, and 220 VAC 1-phase and 208/230/460/575 VAC 3-phase
  • Dual photoelectric sensors available for safety
  • Optional push buttons, loop detectors, radio control, motion detectors or any combination thereof available for door operation/control
  • PowderGuard® Max powder coat finish options are available in approximately 200 colors as well as custom matching to specification. On the RapidSlat® models PowderGuard® Max is required on curtain to maintain warranty on finish
  • PowderGuard® Textured powdercoat: Industrial textured powdercoat provides a thicker, more scratch resistant coat for added product protection available on brackets, guides and bottom bar
  • Vision lites uniformly spaced of 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (25.4 mm x 254 mm)​​​
  • High wind load options available ​​​
Colors
​​​​

Colors

Standard Color: PowderGuard® Max

  • white color swatch White
  • gray color swatch Gray
  • tan color swatch Tan

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.


Powder Coat Color Options

​PowderGuard® Max powder coat options are available in approximately 200 colors as well as custom matching to specification. On the RapidSlat® PowderGuard® Max is required to maintain warranty on finish. 

PowderGuard® Max​ formula is four times harder than our PowderGuard®​ Premium, providing ehanced strength and durability to the finish and performs well in high cycle applications. Finish also provides easy to clean surface. Available in white, tan, and gray or select a color from approximately 200 RAL powder coat colors.

Powder Guard color options​​​​​​​